Home | Resource Center | Find a Rep | Login
Our Products

Dur-A-Flex Introduces New Moisture Mitigation System

Date: 12/1/2010

Allows resinous floor system installations on concrete slabs as new as 5 -7 days.

EAST HARTFORD, CT. December 1, 2010 - Dur-A-Flex announces the introduction of their new Dur-A-Glaze MVP moisture mitigation primer to their line of resinous flooring products. The new epoxy-based primer effectively reduces moisture vapor emissions in concrete slabs as high as 20 pounds per 1,000 square feet per 24 hours to less than three, thus allowing resinous floor systems to be installed on concrete slabs as soon as 5 - 7 days after being placed. It is also ideal for existing concrete floors where moisture vapor emissions exceed the allowable limits for epoxy floor installations. In addition to its time-saving performance, Dur-A-Glaze MVP also warrants this moisture reduction performance for a full 10 years.

High moisture levels in concrete are a constant challenge to flooring contractors, especially when trying to meet deadlines. A moisture mitigation system is one of the most effective ways of meeting these challenges. By offering their own moisture mitigation system, Dur-A-Flex can now offer their contractor-partners a single source for all their resinous flooring products. And by providing a single-source for their warranty, they also offer peace-of-mind for both the contractor and the facility owner.

Dur-A-Glaze MVP is a two-part epoxy system available in 1 gallon, 5 gallon, and 50 gallon containers. In most cases, a single coat will provide full performance protection.